Free ground shipping on orders over $50*.
FREE TELEPHONE SUPPORT

Magewell Pro Convert HDMI 4K Plus

$999.00
Availability: 12 In Stock
Product Code: 64010
Converters
Magewell

Product Features | Technical Specs | Drivers and Software | Product PDF

Magewell Pro Convert HDMI 4K Plus

One-channel 4K Signal Converter

  • Convert one channel of HDMI signal with embedded audio to NDI stream
  • Loop-through one channel of HDMI signal with embedded audio
Adopting NewTek’s royalty-free NDI® protocol for encoding and transmission, the Pro Convert family easily and reliably converts video signals such as HDMI and SDI into NDI streams. These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.

Interface:

Magewell Ultra Stream HDMI


Features:

Magewell Ultra Stream HDMI


Magewell - Pro Convert HDMI 4K Plus - Technical Specs:

Supported Web Browser (tested)

  • Microsoft Internet Explorer 11
  • Microsoft Edge
  • Mozilla Firefox version 61 and above
  • Google Chrome version 49 and above
  • Apple Safari 11.1 and above
  • Opera 55.0.2994.44 and above

Supported Software (tested)

  • OBS
  • XSplit
  • vMix
  • VidBlasterX
  • Wirecast
  • streamstar SW
  • mimoLive
  • Any other NewTek NDI-enabled encoding or streaming software

Input Interfaces

  • HDMI
    • DVI-D 1.0
    • HDMI 1.4
    • HDMI 2.0

Loop-through Interface

  • HDMI
    • DVI-D 1.0
    • HDMI 1.4
    • HDMI 2.0

Storage Interface

  • SD Card (functions to be developed)

PTZ + TALLY Control

  • Mini-DIN–8 jack

Screw Mounting Hole

  • ¼–20 mounting hole

Network Interfaces

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

USB Interface

  • USB2.0 Type B
  • 5V/2.1A power supply
  • USB RNDIS/ECM

Input Features

  • Support for input video resolutions up to 4:4:4 8-bit 4096x2160 60fps

HDMI Specific Features

  • 600MHz HDMI receiver
  • Adaptive HDMI equalizer
  • Support for customized EDID
  • Support for extraction of AVI/Audio InfoFrames
  • Full colorimetry support
  • Support for up to 4096x2160 4:4:4 60fps input signals
  • Support for 8 channel IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

NDI® Output Format

  • Support for 4:2:2 8-bit output
  • Support for up to 4096x2160 60fps or 1920x1080 240fps
  • Support for NDI 3.x

Video Processing Features

  • Video processing pipelines with 4096x2160 60fps
  • Video brightness, contrast, saturation, hue adjustment
  • Video de-interlacing
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of output aspect ratio
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of output color format, quantization range & saturation range
    • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
    • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Video mirror flip

NDI® Source Name

  • Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
  • Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
  • Support for setting board-index, from 0 to F, through on-board rotary switch

Firmware Upgrade

  • Support for manual update using Web UI

LED Indicator

  • Status LEDs indicate:
    • the state of power supply: on/off
    • Tally: preview/program
    • the state of input signal: locked/unlocked
    • the state of loopthrough signal: loopthrough connected and signal detected/undetected

Form Factor

  • 117.5mm (L) x 66.7mm (W) x 23.4mm (H)

Accessories

  • USB 2.0 A to B Cable
  • 5V/2.1A power adaptor
  • Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
  • L-bracket
  • LED matrix panel (optional)

Power Consumption

  • 5V max current: ~2A
  • Max power consumption: ~10W

Working Environment

  • Operating temperature: 0 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing
  • All StreamGear Store products come with a 15 day satisfaction guarantee.
  • If you wish to return a product, please contact us for instructions to ensure you get refunded as quickly as possible.
  • We offer Free Phone Support as well - we want you to be happy with your purchase!
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page